-
Product DescriptionCompany Info.<>
- Material:
- Aluminum alloy
- Performance:
- Automatic
- Driving mode:
- Pneumatic
- Maximum supply gas pressure:
- 7
- Allowable particle value:
- 8 mm
- Suction range:
- 5 m
- Outlet pressure:
- 0.5 Mpa
- Lift:
- 50 m
- Flow:
- 1 m3/h
- Working pressure:
- 5
- Place of origin:
- Shanghai
- Model:
- QBY3-25ALF
Pneumatic diaphragm pump Product overview
QBY3 (QBK) pneumatic diaphragm pump is the third generation pneumatic diaphragm pump, with reliable quality, long service life, noise bottom, small vibration, fine workmanship and other advantages, that can pump flowing liquid, but also can transport some difficult to flow medium, with self-priming pump, submersible pump, shield pump, mud pump and impurity pump and other transport machinery many advantages. nbsp;
1, no need to fill water, suction up to 5 meters, lift up to 70 meters, outlet pressure ≥ 7bar
2, the flow is spacious, through the performance is good, allowing the passage of * large particle diameter up to 10 mm. Pumping mud, impurities, pump wear little;
3, lift, flow can be achieved through the valve opening stepless adjustment (air pressure adjustment between 1-7bar)
4. The pump has no rotating parts, no shaft seal, diaphragm and other pumped media are completely separated from the moving parts of the pump and the workpiece media, and the conveyed media will not leak outward. So pumping toxic, volatile or corrosive medium, will not cause environmental pollution and harm personal safety;
5, do not need electricity, safe and reliable use in flammable and explosive places
6. Can be immersed in media to work
7, easy to use, reliable work, open and stop simply open and close the gas valve, even if due to accidents and long-term operation without medium or sudden stop pump will not be damaged, once overloaded, the pump will automatically stop, with self-protection performance, when the load returns to normal, and can automatically start operation;
8, simple structure, less wearing parts, the pump structure is simple, easy to install and maintain, the pump delivery medium will not contact the valve, link and other moving parts, unlike other types of pumps due to rotor, piston, gear, blade and other parts of the wear and tear and performance gradually decline;
9, can transport more viscous liquid (viscosity below 10,000 centipoise);
10, the pump does not need oil lubrication, even if idling, there is no impact on the pump, which is a major feature of the pump;Performance parameters ofthe third generation pneumatic diaphragm pump
model
Type
* High traffic
Max Flow
（L/min）
* Large lift
Max Head
（m）
* Large suction range
Suction Lift
（m）
outlet pressure
Max.air Pressure
（kg）
suction aperture
Suction Size
（mm）
discharge aperture
Discharge Size
（mm）
inlet aperture
Air Inlet
（in）
* Large pass particle diameter
Max Grain Diameter
（mm）
weight
Weight
（kg）
QBY3-10
17
70
3
7
10
10
1/4
0.5
6
QBY3-15
17
70
3
7
15
15
1/4
0.5
6
QBY3-20
50
70
4
7
20
20
1/4
2.5
9
QBY3-25
50
70
4
7
25
25
1/4
2.5
9
QBY3-32
150
70
5
7
32
32
1/2
4
20
QBY3-40
150
70
5
7
40
40
1/2
4
20
QBY3-50
340
70
5
7
50
50
1/2
5
40
QBY3-65
340
70
5
7
65
65
1/2
5
40
QBY3-80
570
70
5
7
80
80
1/2
6
QBY3-100
570
70
5
7
100
100
1/2
6
QBY3-125
1000
70
5
7
125
125
3/4
10
QBY3-150
1000
70
5
7
150
150
3/4
10
- Name（chinese）
- Name（English）
- Shanghai Tangma Pump Valve Co., Ltd.
- China credit code
- Identity Verification
- Registered Capital
- 16,880,000 CNY
- Operating term
- 2013-01-06 ~ ****
- Product Category
- other
- Address
-
Jinshan District, Shanghai, China
- Nearby port
- Shanghai
Shanghai Tangma Pump Valve Co., Ltd. is a company specializing in the manufacturing, production and sales of water pumps and valves. The company is located in Tinglin Town, an important industrial town in Jinshan District, Shanghai City, with very convenient transportation. The company always adheres to the concept of "technological innovation, win-win cooperation, integrity and efficiency, and first-class service" and builds its corporate brand with high and new technology. We have a professional team and mature technology, and are determined to create an outstanding competitor in the pump and valve industry. Product materials include plastic, brass, cast iron, carbon steel, stainless steel, alloy steel, special alloy steel, etc. Product standards are mainly produced using national standards, American Standards and other domestic and foreign standards. The main products include: diaphragm pumps, magnetic pumps, chemical pumps, self-priming pumps, submerged pumps, pipeline centrifugal pumps, multistage pumps, submersible pumps, sewage pumps, oil pumps, fire pumps, fire boosting and stabilizing equipment, frequency conversion and non-negative pressure water supply equipment; Ball valves, butterfly valves, gate valves, solenoid valves, regulating valves, stop valves, check valves, vacuum valves, hydraulic control valves and non-standard valves customized; valve drive types include manual, pneumatic, electric, hydraulic, and electro-hydraulic. The company's products are widely used in chemical industry, environmental protection, water treatment, printing and dyeing, textile, papermaking, water supply, food, smelting, electricity, natural gas, heating, municipal administration, building water supply and drainage and other industries, and are deeply trusted by users. Craft depends on the details, and the details determine success or failure. Tangma Company and all employees invite you to join hands to create a brilliant tomorrow.- Name（chinese）
- Name（English）
- Shanghai Tangma Pump Valve Co., Ltd.
- China credit code
- Identity Verification
- Registered Capital
- 16,880,000 CNY
- Operating term
- 2013-01-06 ~ ****
- Product Category
- other
- Address
-
Jinshan District, Shanghai, China
- Nearby port
- Shanghai
Shanghai Tangma Pump Valve Co., Ltd. is a company specializing in the manufacturing, production and sales of water pumps and valves. The company is located in Tinglin Town, an important industrial town in Jinshan District, Shanghai City, with very convenient transportation. The company always adheres to the concept of "technological innovation, win-win cooperation, integrity and efficiency, and first-class service" and builds its corporate brand with high and new technology. We have a professional team and mature technology, and are determined to create an outstanding competitor in the pump and valve industry. Product materials include plastic, brass, cast iron, carbon steel, stainless steel, alloy steel, special alloy steel, etc. Product standards are mainly produced using national standards, American Standards and other domestic and foreign standards. The main products include: diaphragm pumps, magnetic pumps, chemical pumps, self-priming pumps, submerged pumps, pipeline centrifugal pumps, multistage pumps, submersible pumps, sewage pumps, oil pumps, fire pumps, fire boosting and stabilizing equipment, frequency conversion and non-negative pressure water supply equipment; Ball valves, butterfly valves, gate valves, solenoid valves, regulating valves, stop valves, check valves, vacuum valves, hydraulic control valves and non-standard valves customized; valve drive types include manual, pneumatic, electric, hydraulic, and electro-hydraulic. The company's products are widely used in chemical industry, environmental protection, water treatment, printing and dyeing, textile, papermaking, water supply, food, smelting, electricity, natural gas, heating, municipal administration, building water supply and drainage and other industries, and are deeply trusted by users. Craft depends on the details, and the details determine success or failure. Tangma Company and all employees invite you to join hands to create a brilliant tomorrow. -
Send your message to this supplier*From:*To:
Mr. tang
*Message:Inquiry
Copyright © 2003 - 2025 Goepe.com All rights reserved.